Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Windows Line-In
Hello, I've been recording services at my church for a couple weeks and
I thought I had all the settings correct, because it normally records fine. This particular week though, the line in port wasn't working as it did in the past -- it would only record up to -6db on all software, when cables were plugged in to line in. When I unplugged and popped them into the mic port, I was able to get it to normal clipping levels, and then when I put it back into line in -- the clipping happened at -6db again. Any ideas why this would happen and how I can fix this? Thanks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS PMC LB1 transmission line nearfield monitors | Pro Audio | |||
Power Filtration | Audio Opinions | |||
Wiring problems at gig (phantom power/balanced line) | Pro Audio | |||
Tube line and phono pre amp project >PING Patrick | Vacuum Tubes | |||
Adventures with a Heathkit TC-2 | Vacuum Tubes |