FS - PAIR OF KAWAI EQ-8 8-CHANNEL PARAMETRIC EQUALIZERS


I am selling a pair of Kawai 8-channel Parametric Equalizer modules.

Each is a compact 1-space rack mount parametric equalizer which allows you
to equalize up
to 8 instruments or channels separately. Wide-range gain capacity permits
controlling of
different levels from keyboards, guitars and microphones. Wide or narrow
tone control by
switching the "Q" function. Broad frequency response (50Hz - 15kHz).
More sensitive tone control can be obtained by linking equalizers together.
High S/N
ration to meet today's highest studio requirements.


$150 for the pair / obo

Pictures:
http://www.manualmanor.50megs.com/pics/KawaiEQ8A.jpg
http://www.manualmanor.50megs.com/pics/KawaiEQ8B.jpg
http://www.manualmanor.50megs.com/pics/KawaiEQ8C.jpg
http://www.manualmanor.50megs.com/pics/KawaiEQ8D.jpg
http://www.manualmanor.50megs.com/pics/KawaiEQ8E.jpg
http://www.manualmanor.50megs.com/pics/KawaiEQ8F.jpg

Description -

Front Panel Controls:

POWER Switch and LED INdicator
8 x GAIN (1,3 CH: L/M/MIC) (2,4~8CH: L/M/H) - These 3-position switches
allow adjusting the
channel gain to match the input level. Channels 1 and 3 substitute a
special MIC position
for higher gain.
8 x Q - Selects from 3 different curves to set to the equalization slope
from the central
frequency to the slope edge
8 x FREQ RANGE (X0.1, X1) - Selects the frequency range to be equalized (0.8
/ 2 / 6)
X1: 500Hz to 15kHz
x0.1: 50Hz to 1.5kHz
8 X FREQ - Selects the frequency point to be equalized (+/-15dB)
8 X LEVEL - Boosts or cuts the level of frequency selected

LINK Operation -
The EQ-8 is normally used as a 8IN/OUT single-device parametric equalizer.
But the individual
equalizers are internally linked in pairs, and can be used for 2-band
equalizers (1&2, 3&4, 5&6, 7&8).
Further "linking" can be done using chain Input/output connections between
equalizers on the rear panel.

Rear Panel Connections:

INPUT (1-8 CH) - 1/4-inch jacks (microphones can be used in channels 1 & 3)
OUTPUT (1-8 CH)- 1/4-inch phone jacks
DC In - plug for AC Adapter

Specifications:

Input -
GAIN SW L: 0dBm / Max 21dBm / Impedance 10k Ohm / Suitable Source
Impedance less than 1k ohm
GAIN SW M: -10dBm / Max 11dBm / Impedance 10k Ohm / Suitable Source
Impedance less than 1k ohm
GAIN SW H: -20dBm / Max 1dBm / Impedance 10k Ohm / Suitable Source
Impedance less than 1k ohm
GAIN SW MIC: -45dBm / Max -24dBm / Impedance 10k Ohm / Suitable Source
Impedance less than 1k ohm

Output (1-8 CH) -
-10dBm Output level rating / Max 10.5dBm / Output Impedance 1k Ohm /
Suitable Load Impedance more than 5k ohm

Frequency Response -
GAIN SW L/M/H: 20Hz - 70kHz (within +0.5 / -3 dB/kHz)
GAIN SW MIC: 25Hz - 30kHz (within +0.5 / -3 dB/kHz)


Residual Noise -
GAIN SW L/M/H: -95dBm (IHF-A curve, input terminal short-circuited)
GAIN SW MIC: -86dBm (IHF-A curve, input terminal short-circuited)

Crosstalk - Less than 70dB
Total Harmonic Distortion - Less than 0.05% (50Hz - 10kHz, output level
0dBm)

Power: DC 12V adaptor, 3.2W

Dimensions: single space high 19-in rack mount, 6 inches deep
Weight: 4 pounds



Contact Mark

Many Net References, eBay rating +1174
Located Arlington,TX

Much more studio equipment FS:
http://www.markglinsky.com/Msgmus.html

Musical / Audio / Video Equipment Manuals available at:
http://www.markglinsky.com/ManualManor.html