Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
These are described as 1/3 rack units. Can one actually fit three units side
by side in a standard 1U rack tray? Glenn D. |
#2
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
Glenn Dowdy wrote:
These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Yes, or you can buy a fancy rack tray to hold them, with a bezel on the front. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#3
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
"Scott Dorsey" wrote in message ... Glenn Dowdy wrote: These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Yes, or you can buy a fancy rack tray to hold them, with a bezel on the front. Thanks. I've seen the fancy units, and I'm offered one with the RNP I'm buying, but if I get a second RNC I think that the simple tray will suit me better. Glenn D. |
#4
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
Glenn Dowdy wrote:
These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Glenn D. Yes; been there, done that, sadly no tee shirt for said event. G Later... Ron Capik -- |
#5
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
"Glenn Dowdy" put forth the notion
: These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Glenn D. I do with mine (RNP, RNC, RNLA). david |
#6
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
"Glenn Dowdy" wrote in message ... These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Glenn D. Yes but don't make the mistake I made. Buy a shelf that is not too deep (5 or 6" is good) so that it is easy to access the rear of the units |
#7
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
"Glenn Dowdy" wrote in message
... These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Yes, but the three wall wart power adapters will occupy your entire power strip, unless you take appropriate measures. |
#8
Posted to rec.audio.pro
|
|||
|
|||
RNC/RNP Size
David Grant wrote:
"Glenn Dowdy" wrote in message ... These are described as 1/3 rack units. Can one actually fit three units side by side in a standard 1U rack tray? Glenn D. Yes but don't make the mistake I made. Buy a shelf that is not too deep (5 or 6" is good) so that it is easy to access the rear of the units Symetrix sells a shelf for use with their 300 series units that works very well with the FMR stuff, and also with the Speck pieces. -- ha shut up and play your guitar |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
so what DIN size is this HU? | Car Audio | |||
What is the DIN size? | Car Audio | |||
What is the DIN size? | Car Audio | |||
What size amp should i buy | Car Audio | |||
Decca tree size - related to room size? | Pro Audio |