Home |
Search |
Today's Posts |
#1
Posted to rec.audio.high-end
|
|||
|
|||
Question about Primare A10
Might as well ask while I'm at it... [will also post to uk.rec.audio]
I heard a slight pop in my JMlab 905s yesterday followed by a loss of audio to both channels. The amp was idling at low volume with a source connected. It is cold here -18C outside, 11C indoors, and the A10 is situated near an air vent (and was cold to the touch). The display illuminates but on power up I no longer hear the relay switch click. Does this suggest any obvious fault?? -- S i g n a l @ l i n e o n e . n e t |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Primare vs. Copland | Audio Opinions | |||
Primare vs. Copland | Pro Audio | |||
Primare vs. Copland | General | |||
Primare vs. Copland | Tech | |||
Primare vs. Copland | Pro Audio |