Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.tubes
Big Bad Bob Big Bad Bob is offline
external usenet poster
 
Posts: 366
Default tube-making, the equipment, and the process

Peter Wieck suggested some videos, and I found others, that might he
helpful to anyone who might want to make tubes.

These two go over the needed equipment (poor audio quality though)

https://www.youtube.com/watch?v=3FN9J4zgsgk
https://www.youtube.com/watch?v=DeowhLVl7Hw

These show actually making tubes

https://www.youtube.com/watch?v=EzyXMEpq4qw
https://www.youtube.com/watch?v=5WCWejeRR_s


This wikipedia page discusses the glass to metal seal and various
materials that can be used to achieve a good one. This was only hinted
at in the Mullard video.

https://en.wikipedia.org/wiki/Glass-to-metal_seal


And this link is a web site for what is apparently the last small glass
tube maker in the USA, and the company is downsizing and selling off
equipment and other stuff (like prototype tubes).

http://vacuumtubefactory.com/


I'm pretty sure that tube-related tech is STILL valid for a lot of
things for which there is no (reasonable) solid state equivalent, and
it's not just microwave ovens, RF power stages, and nixie clocks, and
things of that mature. i've got ideas of my own, different ways to heat
a cathode that would allow for VERY high cathode potentials [as one
example] as opposed to using hundreds or even thousands of selenium
rectifier disks to build a giant stack (let's say 1,000,000 volts DC).
Done right, a glass envelope would not have to be several feet long nor
contain a bunch of transformers in series to insulate up to a megavolt.
And you'd be able to use these as a voltage multiplier [which could have
very wide potential swings].


As such we don't want to lose the skills needed to make them. I'm sure
there are even more uses that have not yet been discovered.


--
(aka 'Bombastic Bob' in case you wondered)

'Feeling with my fingers, and thinking with my brain' - me

'your story is so touching, but it sounds just like a lie'
"Straighten up and fly right"
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Making your own vacuum tube (video) general disrepair Vacuum Tubes 0 January 9th 08 04:58 AM
Sony's DSD to 16 bit/44.1 PCM process [email protected] Pro Audio 0 April 26th 07 07:41 AM
tube equipment available Dan Lanciani Vacuum Tubes 0 August 13th 06 03:58 AM
FA: Old Tube Equipment - LAST DAY! homedetective Vacuum Tubes 0 December 17th 05 07:04 PM
process needed RB Tech 2 November 25th 03 03:09 PM


All times are GMT +1. The time now is 02:25 PM.

Powered by: vBulletin
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"