Hello,



My system is made of Electrocompaniet ECI-2 amp (50 W /8 ohma), Cyrus dAD3Q
cd player, speakers are Audio Epilog, model Cortez, handmande by local
manfacturer here in Croata, 88dB, 10 Ohma. These speakers are using Focal
drivers, the sound is detailed with good extension in bass, very good
soundstage, but with some sharpness in high freq.

My previous amp was Maranty PM 66SE and I've replaced it with ECI-2. ECI
has solved this problem with tweeters. In my opinion it is a fine piece of
amp, very musical and also good looking.

At this moment I'm serching for optimal speaker cabele and optimal
interconct cable for my system.



Please feel free to write down your recommendations.

(I'm thinking to try with LAT SS-1000 D or MIT Terminator 2 for speaker
cable. )



My listening room dimensions are 5.0 m x 3.5 m, hight is 2.80 m. Music that
I'm listening is various, about 50% is jazz in all of it's beautiful
variations, from avantguarde & free to bebop&swing, some rock and some
classical.



Can you also recommend a power supply cable for ECI-2?



Best regards,



Igor

This topic has been covered exhaustively several times. (In my book) there
is no magic
nor hype involved in lashing an amp o/p to a loudspeaker system i/p.
Elitist cable is not advised by me for speakers: just two multi-stranded,
copper conductors
capable of handling peak current easily and having very low resistance.
Use the money saved for spending on boxes with clever internal circuitry.
Connectors? Mating and well-fitting. Ensure every interface is made cleanly
and tightly at the amp
and via a healthy lead to/from the other gear's terminals. Gold is wasted
here.

"Igor" wrote in message
...
Hello,



My system is made of Electrocompaniet ECI-2 amp (50 W /8 ohma), Cyrus
dAD3Q
cd player, speakers are Audio Epilog, model Cortez, handmande by local
manfacturer here in Croata, 88dB, 10 Ohma. These speakers are using Focal
drivers, the sound is detailed with good extension in bass, very good
soundstage, but with some sharpness in high freq.

My previous amp was Maranty PM 66SE and I've replaced it with ECI-2. ECI
has solved this problem with tweeters. In my opinion it is a fine piece of
amp, very musical and also good looking.

At this moment I'm serching for optimal speaker cabele and optimal
interconct cable for my system.



Please feel free to write down your recommendations.

(I'm thinking to try with LAT SS-1000 D or MIT Terminator 2 for speaker
cable. )



My listening room dimensions are 5.0 m x 3.5 m, hight is 2.80 m. Music
that
I'm listening is various, about 50% is jazz in all of it's beautiful
variations, from avantguarde & free to bebop&swing, some rock and some
classical.



Can you also recommend a power supply cable for ECI-2?



Best regards,



Igor