Home |
Search |
Today's Posts |
#1
Posted to rec.audio.car
|
|||
|
|||
replacing factory radio with kenwood 7015 excelon
i need teh original cables wiring of my sunfire 2000 so i can install
the new one kenwood 7015 excelon , somebody can help me please |
#2
Posted to rec.audio.car
|
|||
|
|||
replacing factory radio with kenwood 7015 excelon
If I understand what you're saying, no. You need the cables coming out
of the car, but you'll have to buy a pontiac sunfire 2000 wiring harness (you can get one at best buy or online for about $15)to connect your 7015 to the cable coming out of the car. Does that make since? If you plan on installing it yourself, you might want to consider buying an installation guide from crutchfield.com. They are really helpful. wrote: i need teh original cables wiring of my sunfire 2000 so i can install the new one kenwood 7015 excelon , somebody can help me please |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kenwood in-dash radio closes even though faceplate removed | Car Audio | |||
Kenwood KVT 911 DVD radio signal is bad | Car Audio | |||
Problem with Kenwood KDC-MP625 shutting off | Car Audio | |||
Kenwood M4524 - Audi A4 2003 : static and power problems. | Car Audio | |||
Kenwood DPX-5000 Factory Reset | Car Audio |