| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
Sending it out to the house: EQ then compressor or vice versa?
ChrisCoaster wrote:
I've always been confused about this one. Any advice? If you're talking about a 'sound reinforcement' application... then you're talking about both shaping the sound, and system protection. From the perspective of 'shaping the sound', you probably want to EQ then compress... if you're talking about system protection... then you want a peak limiter at the end of the chain to prevent spikes that are enhanced in level by the EQ from turning into a 'catastrophic failure' kind of thing. Best of luck with it. -- Fletcher Mercenary Audio TEL: 508-543-0069 FAX: 508-543-9670 http://www.mercenary.com "this is not a problem" |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| House of Bush, House of Saud, House of Cards | Audio Opinions | |||
| Surround & Throughout House? | General | |||
| Scientific proof that digital sound is bad | Audio Opinions | |||
| Using DJ Amplifiers in Home Theater | Audio Opinions | |||
| Where are those Wascally Weapons of Mass Destwuction??? | Audio Opinions | |||
Threaded Mode