Home |
Search |
Today's Posts |
#1
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Can anyone point me to some quality 2 channel amps that will deliver 500
watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel |
#2
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Wild Weasel wrote:
Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel Well, the Audiobahn A1502DP is advertised as 450W X 2 into one-ohm loads, but I've never used one, so I can't vouch for either the quality of the amp or the accuracy of the ratings. I think the problem you're going to run into is that the combination of 1000WRMS total power in stereo mode *and* 1-ohm stability is pretty rare. The widespread availability of one-ohm amps is a relatively recent development, and most of the manufacturers figure that the only thing people will need 1000WRMS for is powering a subwoofer, so that's why you see so many mono amps in that range but hardly any stereo amps. What are you wanting to power with this amp? Scott Gardner |
#3
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Scott Gardner wrote in
newsflJc.403$ml.366@lakeread05: I'm thinking of installing 3 sets of CDT 6.5" cast comp mids in my whip and am kicking around the idea of driving them from one amp (wired in parallel). Wild Weasel wrote: Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel snip What are you wanting to power with this amp? Scott Gardner |
#4
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Wild Weasel wrote:
Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel The old Rockford Fosgate punch amps were 1 ohm stable (I know this from experience). -Ken |
#5
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Ken Hoinsky wrote:
Wild Weasel wrote: Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel The old Rockford Fosgate punch amps were 1 ohm stable (I know this from experience). -Ken Yep, I was thinking about the older Punch amps, but I assumed he was interested in modern amps, and anyway, I couldn't remember if any of the Punch amps could put out 1000WRMS, even running a 1-ohm load. Scott Gardner |
#6
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Scott Gardner wrote:
Ken Hoinsky wrote: Wild Weasel wrote: Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel The old Rockford Fosgate punch amps were 1 ohm stable (I know this from experience). -Ken Yep, I was thinking about the older Punch amps, but I assumed he was interested in modern amps, and anyway, I couldn't remember if any of the Punch amps could put out 1000WRMS, even running a 1-ohm load. Scott Gardner The 800@2 one could do about 1000 watts RMS with the alternator running... I just picked one up on ebay for $165 I got one new when it came out for around $450 (which was a killer deal back then). -Ken |
#7
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
Soundstream 3.0 and 6.0 .. Also 5.0 and 10.0 on eBay now .. Class A amps stable to 1/2 ohm stereo .. Orion Hcca as well .. Ma Audio High current .. Lanzar High current for the cheapies that'll get teh job done ..Good luck !! Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel -- Mister_B ------------------------------------------------------------------------ Mister_B's Profile: http://www.caraudioforum.com/vbb3/me...p?userid=28133 View this thread: http://www.caraudioforum.com/vbb3/sh...d.php?t=194794 |
#8
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
I think the older Kicker ZR series went to 1 ohm in stereo. If they didn't,
they sure could have - much like those Rockfords that were mentioned. ESX Quantum series could go down to 1 ohm in stereo too. Both had class AB amps that will deliver 500 watts per channel. However, neither of them are made anymore. -- Mark remove "remove" and "spam" to reply "Wild Weasel" wrote in message . 97.136... Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel |
#9
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
older stuff
PG MS series amps US AMPS. perhaps an Orion HCCA. How bout a SS Rubi 1000? and of course the older rockford punch series. FHLH.... older amps RULE. "Wild Weasel" wrote in message . 97.136... Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel |
#10
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
depends on the LANZAR.... if it's a pre 99 or 98 (can't recall when
soundaround bought them) OPTI, those things friggin rock FHLH..... so do older autotek's, Linear Power's, etc.. etc... etc... "Mister_B" wrote in message ... Soundstream 3.0 and 6.0 .. Also 5.0 and 10.0 on eBay now .. Class A amps stable to 1/2 ohm stereo .. Orion Hcca as well .. Ma Audio High current . Lanzar High current for the cheapies that'll get teh job done ..Good luck !! Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel -- Mister_B ------------------------------------------------------------------------ Mister_B's Profile: http://www.caraudioforum.com/vbb3/me...p?userid=28133 View this thread: http://www.caraudioforum.com/vbb3/sh...d.php?t=194794 |
#11
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
depends on the LANZAR.... if it's a pre 99 or 98 (can't recall when
soundaround bought them) OPTI, those things friggin rock FHLH..... so do older autotek's, Linear Power's, etc.. etc... etc... Autotek changed? |
#12
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
didn't say they changed.... just like their older gear... the grey amp
days... FHLH .. likes the old stuff "MZ" wrote in message ... depends on the LANZAR.... if it's a pre 99 or 98 (can't recall when soundaround bought them) OPTI, those things friggin rock FHLH..... so do older autotek's, Linear Power's, etc.. etc... etc... Autotek changed? |
#13
|
|||
|
|||
500W RMS Stereo amp stable@1ohm??
My ZR1000 works fine @ 1ohm stereo
"MZ" wrote in message ... I think the older Kicker ZR series went to 1 ohm in stereo. If they didn't, they sure could have - much like those Rockfords that were mentioned. ESX Quantum series could go down to 1 ohm in stereo too. Both had class AB amps that will deliver 500 watts per channel. However, neither of them are made anymore. -- Mark remove "remove" and "spam" to reply "Wild Weasel" wrote in message . 97.136... Can anyone point me to some quality 2 channel amps that will deliver 500 watts per channel RMS into a 1 ohm load? The only 1 ohm stable amps I've been able to find are mono sub amps.a Best Regards Marcel |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Story of the poor car stereo | Car Audio | |||
No stereo separation in Suburbans 2003-2004, plus other GM vehicles! Check for yourself. | Car Audio | |||
Need Help With Car Stereo - Sable Wagon | Car Audio | |||
Pioneer DEH-1500 - Clear reception, limited FM Stereo | Car Audio | |||
stolen car stereo and cigarette lighter | Car Audio |