[please_post_to_groups]

Greetings All

Can someone recommend a good vst to change the phase of a signal?
Example if the channel 1 sin wave starts in phase
I would like to change the phase of channel 2 sine wave to start a 30 degrees out of phase

tia sal2

[Scott Dorsey]

please_post_to_groups wrote:
Can someone recommend a good vst to change the phase of a signal?
Example if the channel 1 sin wave starts in phase
I would like to change the phase of channel 2 sine wave to start a 30 degrees out of phase

Sounds like what you want is delay. No VST should be required. You should
have a delay or time alignment function already in the DAW.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[Les Cargill]

please_post_to_groups wrote:
Greetings All

Can someone recommend a good vst to change the phase of a signal?
Example if the channel 1 sin wave starts in phase
I would like to change the phase of channel 2 sine wave to start a 30 degrees out of phase

tia sal2



I am not 100% sure what this does. But here it is:

http://www.sonicspot.com/ultrafunkfx...nkfxphase.html

SFAIK, it only works on the left/right halves of a stereo track.

--
Les Cargill