Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Wanted: Software to record tape audio to CD
Hi,
Here's what I've done in the past for recording taped audio/speech to a CD. I've used CoolEdit to record from the audio input jack at 44,100Hz in 16-bit audio as the tape is playing on a high-quality deck to the headphone jack, with a cable connecting the headphone jack to the audio input jack on the computer. Once the music/speech has been recorded, I painfully scroll through the waveform to look for quiet spots, which is where I break up the waveform into individual songs or speeches. Then I rename those songs/speeches into "Track # - Name" format for burning to a CD. The daunting part of the task is simply recording the tape into digital format, then painfully breaking it up into smaller pieces which will end up as tracks on the CD. Is there software that is smart enough to do all of what I do in the first paragraph in one or two steps? Even if I can get a program that's smart enough to break up the waveform based on the level of volume, that would be a great help. =) Thanks in advance, Isaac --- Plan A: Alarm goes off, commute, work, commute, sleep, repeat. Plan B: Hit snooze, watch others commute, have fun, sleep, repeat. For more info on Plan B, visit http://www.globalsuccess2000.com/nonstop_income Get Unlimited Long Distance on your Home Phone! http://www.excelir.com/rachaelnisaac |
#2
|
|||
|
|||
Wanted: Software to record tape audio to CD
|
#3
|
|||
|
|||
Wanted: Software to record tape audio to CD
"Isaac Grover" wrote in message
m Hi, Here's what I've done in the past for recording taped audio/speech to a CD. I've used CoolEdit to record from the audio input jack at 44,100Hz in 16-bit audio as the tape is playing on a high-quality deck to the headphone jack, with a cable connecting the headphone jack to the audio input jack on the computer. Once the music/speech has been recorded, I painfully scroll through the waveform to look for quiet spots, which is where I break up the waveform into individual songs or speeches. Then I rename those songs/speeches into "Track # - Name" format for burning to a CD. The daunting part of the task is simply recording the tape into digital format, then painfully breaking it up into smaller pieces which will end up as tracks on the CD. Is there software that is smart enough to do all of what I do in the first paragraph in one or two steps? Even if I can get a program that's smart enough to break up the waveform based on the level of volume, that would be a great help. =) The problem is that software can't duplicate the accuracy of an intelligent human for tasks like these. If you're doing a quality job of breaking up tracks, then you also want to work over the fade-ins, fade-outs, and perhaps optimize the levels. IME, the most painful part of breaking a long track up into files is the time it takes. CoolEdit runs operations like these a whole lot faster in a system with two hard drives - keep the input and output .wav files on one disk, and use the other disk for CoolEdit's work files. |
#4
|
|||
|
|||
Wanted: Software to record tape audio to CD
Isaac Grover wrote:
Hi, Here's what I've done in the past for recording taped audio/speech to a CD. I've used CoolEdit to record from the audio input jack at 44,100Hz in 16-bit audio as the tape is playing on a high-quality deck to the headphone jack, with a cable connecting the headphone jack to the audio input jack on the computer. Once the music/speech has been recorded, I painfully scroll through the waveform to look for quiet spots, which is where I break up the waveform into individual songs or speeches. Then I rename those songs/speeches into "Track # - Name" format for burning to a CD. The daunting part of the task is simply recording the tape into digital format, then painfully breaking it up into smaller pieces which will end up as tracks on the CD. Is there software that is smart enough to do all of what I do in the first paragraph in one or two steps? Even if I can get a program that's smart enough to break up the waveform based on the level of volume, that would be a great help. =) Thanks in advance, Isaac SoundForge 5.0 do that for you. You just have to put "mark" at the end of each tracks to create "regions". At the end of the process you can extract each "regions" independently to your HD with or without generic name, these should be *.wav files obviously. |
#6
|
|||
|
|||
Wanted: Software to record tape audio to CD
Lionel wrote in message ...
SoundForge 5.0 do that for you. You just have to put "mark" at the end of each tracks to create "regions". At the end of the process you can extract each "regions" independently to your HD with or without generic name, these should be *.wav files obviously. I've been working with CD Wave for about a week, which does an excellent job of automatically splitting tracks. My only problem is joining two segments after they were incorrectly split. Does SoundForge allow the end user to remove split points? Isaac --- Plan A: Work 40 hours a week for 40 years and retire with 40% of your income. Plan B: Work 10 hours a week for 5 years and retire with 100%+ of your income. For more info on Plan B, visit http://nonstop-income.v3.net |
#7
|
|||
|
|||
Wanted: Software to record tape audio to CD
Isaac Grover wrote:
Lionel wrote in message ... SoundForge 5.0 do that for you. You just have to put "mark" at the end of each tracks to create "regions". At the end of the process you can extract each "regions" independently to your HD with or without generic name, these should be *.wav files obviously. I've been working with CD Wave for about a week, which does an excellent job of automatically splitting tracks. My only problem is joining two segments after they were incorrectly split. Does SoundForge allow the end user to remove split points? Yes because they are like "tabulation mark" in a word processor... You can move them, remove... You can also finely tune where they will be automatically placed according to your tape recording specificity. Nothing is definitive since you decide to extract the created regions. SoundForge has a lot of features which can handle this particular problem. Note that I don't know CD Wave. I hope it's enough clear, ;-) Lionel |
#8
|
|||
|
|||
Wanted: Software to record tape audio to CD
|
#9
|
|||
|
|||
Wanted: Software to record tape audio to CD
I use a wave recorder (like Creative Recorder) to create one wave file for
the side of an LP, then use LP Ripper to split that file into tracks (i.e. after recording, not during). With LP Ripper, you can preview (audibly and visually) the splits and change the split points before the individual tracks are created, thereby avoiding the need to stitch tracks back together. Also, "needle noise" at the beginning and end of each side (of the LP) can be easily cut off before the tracks are created. Ron B (to respond directly, delete the prot) "Clive Backham" wrote in message ... On 22 Oct 2003 09:56:25 -0700, (Isaac Grover) wrote: I have been using CD Wave for about a week now, and it's saved me so much time over using my original CoolEdit cut-n-paste method. =) My only problem is, as you mentioned above, stitching tracks back together when the program incorrectly split them up. With CD Wave, I don't see any way to remove a split point. Can CD Wave do this, or do I get to experiment with another program now? =) Yes, CD Wave can remove an incorrect split point. In the list of found tracks at the bottom of the screen, right-click on the split to be removed, and choose the "Delete track split" option from the pop-up menu. To add a split point manually, click the mouse at the desired point on the displayed waveform and invoke "Split" from the "Split" menu. (In another posting, you ask whether you can use Sound Forge to do this, and I'm sure you can, but SF is a remarkably expensive program to achieve this simple task). |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Audio Source vs. Cambridge Audio vs. NAD vs. Adcom | General | |||
-Ultimate Audio Reviews Online- | General | |||
fix audio files | General |