Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Sound Board Suggestions
On Aug 26, 1:05 pm, adam79 wrote:
Yeah, the low ceiling height is lame. I live in a basement apartment; the one positive is that the ceiling is made up those gridded tiles/panels, here's a pictuhttp://i273.photobucket.com/albums/j...ding/ceiling_t.... Do these tiles work as sound absorbers, or have I been given wrong information? Also, would removing the tiles give me more headroom (or would the grid that holds them up get in the way)? The main problem with ceiling tiles is they're designed to absorb speech frequencies. So they don't absorb bass, which is needed, and they don't absorb highs either, which is also needed. Unless you can remove the tiles *and* the grid, I'd add better absorbers under the tiles, such as rigid fiberglass that's one or (better) two inches thick. Or replace the tiles with new ones you cut from rigid fiberglass. Then lay fluffy fiberglass above the grid and tiles to help absorb bass. Use fluffy fiberglass that's as thick as possible, given the available space. As for where to put the drums, the goal is to avoid reflections from nearby surfaces. One reflection off the floor is okay, but multiple "early" reflection makes everything you record sound hollow and boxy and like a small room, which of course it is. So the goal is to put the instruments and microphones as far from reflecting surfaces as possible. And/or add absorption on those surfaces. --Ethan |
#2
Posted to rec.audio.pro
|
|||
|
|||
Sound Board Suggestions
Ethan Winer writes:
snip As for where to put the drums, the goal is to avoid reflections from nearby surfaces. One reflection off the floor is okay, but multiple "early" reflection makes everything you record sound hollow and boxy and like a small room, which of course it is. So the goal is to put the instruments and microphones as far from reflecting surfaces as possible. And/or add absorption on those surfaces. RIght, and since you're in a rented apartment movable absorbent flats might be just what you need. Malcolm Chisholm's articles on this are a good start, see google to find recent pointers to his stuff. flats or gobos might be just what you want here. Regards, Richard .... Remote audio in the southland: See www.gatasound.com -- | Remove .my.foot for email | via Waldo's Place USA Fidonet-Internet Gateway Site | Standard disclaimer: The views of this user are strictly his own. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sound Board Suggestions | Pro Audio | |||
DDA Interface sound board | Pro Audio | |||
Inexpensive sound board for sale | Marketplace | |||
$1,500 for a board.. any suggestions? | Pro Audio |