Reply
 
Thread Tools Display Modes
  #1   Report Post  
Bill Pallies
 
Posts: n/a
Default Eclipse CD8443

I just bought the CD8443 tonight and will probably install it this weekend.
I've got a few questions...

1. There is a module, about the size of a pack of cigarettes, connected to
the rear of the unit. I don't see anywhere in the intruction manual what
this is for. Anyone?

2. There are 4 pairs of RCA connections on the back. Sub, Rear, and Front
plus a "Fixed Out". What's this for? The manual shows it in drawings but
never references it in text.

3. Also, the other 3 pairs are labeled "IN/OUT" implying that they can act
as either pre-outs or inputs. Would these be used to connect some external
sound-processors? Just curious, not gonna ever use these as inputs I'm sure.

I haven't even dropped this unit in yet and I'm already very pleased with
it.

Thanks

-Bill


  #2   Report Post  
Bill Pallies
 
Posts: n/a
Default Eclipse CD8443

One more thing: Thanks, Steve. I guess I just had blinders on when
originally shopping for my HU, never noticing the 8443. I would never have
used the extra features on the 8053 anyway, so you saved me ~$100.

-Bill

"Bill Pallies" wrote in message
.. .
I just bought the CD8443 tonight and will probably install it this

weekend.
I've got a few questions...

1. There is a module, about the size of a pack of cigarettes, connected to
the rear of the unit. I don't see anywhere in the intruction manual what
this is for. Anyone?

2. There are 4 pairs of RCA connections on the back. Sub, Rear, and Front
plus a "Fixed Out". What's this for? The manual shows it in drawings but
never references it in text.

3. Also, the other 3 pairs are labeled "IN/OUT" implying that they can act
as either pre-outs or inputs. Would these be used to connect some external
sound-processors? Just curious, not gonna ever use these as inputs I'm

sure.

I haven't even dropped this unit in yet and I'm already very pleased with
it.

Thanks

-Bill




  #3   Report Post  
pittwm
 
Posts: n/a
Default Eclipse CD8443

I have a 8443 installed about 2 weeks ago. FYI, get a timing relay and
delay the amp turn-on about 2 seconds.

There's this turn on thump that many a few of us find with Eclipse 8 V
units. Not a big deal, just thought you might want to know and save you
some time so u don't have to go back and redo the install.
--
pittwm
------------------------------------------------------------------------
CarAudioForum.com - Usenet Gateway w/over one million posts online!
View this thread: http://www.caraudioforum.com/vbb2/sh...hreadid=157675

  #4   Report Post  
Steve Grauman
 
Posts: n/a
Default Eclipse CD8443

There's this turn on thump that many a few of us find with Eclipse 8 V
units

I'm not getting it with my 8443.
  #5   Report Post  
Bill Pallies
 
Posts: n/a
Default Eclipse CD8443

Yup, I got it. Installed the unit last night. First I had the trouble of the
radio being heard, but complete silence when I tried to play CDs (Quiz:
Which wires did I reverse?) :-) Funny thing, though. I didn't get the turn
on thump when I had the amps connected to the power antenna lead. Hmm...

Off to get a delay relay...

-Bill


"pittwm" wrote in message
s.com...
I have a 8443 installed about 2 weeks ago. FYI, get a timing relay and
delay the amp turn-on about 2 seconds.

There's this turn on thump that many a few of us find with Eclipse 8 V
units. Not a big deal, just thought you might want to know and save you
some time so u don't have to go back and redo the install.
--
pittwm
------------------------------------------------------------------------
CarAudioForum.com - Usenet Gateway w/over one million posts online!
View this thread:

http://www.caraudioforum.com/vbb2/sh...hreadid=157675





  #6   Report Post  
Steve Grauman
 
Posts: n/a
Default Eclipse CD8443

One more thing: Thanks, Steve. I guess I just had blinders on when
originally shopping for my HU, never noticing the 8443.

Not a problem, I never noticed it either. But I listened to it, aganist the
8053 (complete with the Balanced Line Adapter for thr 16V output) and couldn't
hear a difference. The "nob" remote wasn't worth $100 to me!
  #7   Report Post  
Steve Grauman
 
Posts: n/a
Default Eclipse CD8443

1. There is a module, about the size of a pack of cigarettes, connected to
the rear of the unit. I don't see anywhere in the intruction manual what
this is for. Anyone?

I believe this has something to do with the Eclipse Commander Unit, but I'm not
positive.

Also, the other 3 pairs are labeled "IN/OUT" implying that they can act
as either pre-outs or inputs. Would these be used to connect some external
sound-processors? Just curious, not gonna ever use these as inputs I'm sure.

Again, I have to imagine this is related to the Commander and/or Eclipse's DSP
processor. I also know that Eclipse's in-dash 6 CD changer uses a digital
connection (letting the deck's DAC do the conversion work), and the single-line
digital connection it uses may require some kind of 2-way communication.
  #8   Report Post  
Ryan Richards \(Diesel Breath\)
 
Posts: n/a
Default Eclipse CD8443

2. There are 4 pairs of RCA connections on the back. Sub, Rear, and Front
plus a "Fixed Out". What's this for? The manual shows it in drawings but
never references it in text.


They are "deadouts"... they are line level signal outs that would go to an
external amplifier if you had one... Make sure you dont have one before
installing the unit...

Later,
Ryan (www.dieselbreath.com)


  #9   Report Post  
Bill Pallies
 
Posts: n/a
Default Eclipse CD8443

I don't understand. I have two external amps as it is, a 4-channel for the
speakers and a 2-channel for the sub. That uses all three preouts (Sub,
Rear, and Front). This still leaves the Line Out. I suppose it's just a
full-range, non-crossed-over, non fading output, but it suprises me that
this isn't referenced in the manual nor is it touted in the sales
liturature.

-Bill


"Ryan Richards (Diesel Breath)" wrote in message
...
2. There are 4 pairs of RCA connections on the back. Sub, Rear, and

Front
plus a "Fixed Out". What's this for? The manual shows it in drawings but
never references it in text.


They are "deadouts"... they are line level signal outs that would go to an
external amplifier if you had one... Make sure you dont have one before
installing the unit...

Later,
Ryan (www.dieselbreath.com)




  #10   Report Post  
KaeZoo
 
Posts: n/a
Default Eclipse CD8443

I'm not familiar with it, but my guess is that it's an output that's not
affected by the head unit's volume control.

"Bill Pallies" wrote in message
m...
I don't understand. I have two external amps as it is, a 4-channel for the
speakers and a 2-channel for the sub. That uses all three preouts (Sub,
Rear, and Front). This still leaves the Line Out. I suppose it's just a
full-range, non-crossed-over, non fading output, but it suprises me that
this isn't referenced in the manual nor is it touted in the sales
liturature.

-Bill


"Ryan Richards (Diesel Breath)" wrote in message
...
2. There are 4 pairs of RCA connections on the back. Sub, Rear, and

Front
plus a "Fixed Out". What's this for? The manual shows it in drawings

but
never references it in text.


They are "deadouts"... they are line level signal outs that would go to

an
external amplifier if you had one... Make sure you dont have one before
installing the unit...

Later,
Ryan (www.dieselbreath.com)








  #11   Report Post  
dolph dolph is offline
Junior Member
 
Posts: 11
Default

Thank u dudes for help!
192.168.l.2

Last edited by dolph : September 6th 16 at 01:21 PM
  #12   Report Post  
Linne Linne is offline
Junior Member
 
Posts: 1
Default

Quote:
Originally Posted by Bill Pallies View Post
I just bought the CD8443 tonight and will probably install it this weekend.
I've got a few questions...

1. There is a module, about the size of a pack of cigarettes, connected to
the rear of the unit. I don't see anywhere in the intruction manual what
this is for. Anyone?

2. There are 4 pairs of RCA connections on the back. Sub, Rear, and Front
plus a "Fixed Out". What's this for? The manual shows it in drawings but
never references it in text.

3. Also, the other 3 pairs are labeled "IN/OUT" implying that they can act
as either pre-outs or inputs. Would these be used to connect some external
sound-processors? Just curious, not gonna ever use these as inputs I'm sure.

I haven't even dropped this unit in yet and I'm already very pleased with
it.

Thanks

-Bill
I would be equally irresponsible if I asserted the reverse, “Imagine not inhaling all that particulate matter, this would be beneficial to someone with COPD and smoke”. This also would be making a medical decision based on imagination, not objective evidence.
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blaupunkt SF vs. Eclipse CD8053 Bill Pallies Car Audio 10 September 3rd 03 07:45 PM
I need help with the Eclipse Commander. Profe§a Car Audio 2 August 28th 03 11:09 PM
Power wire gauge for Eclipse PA4212? Lex Car Audio 0 August 21st 03 05:57 AM
FS: Eclipse 5303 Gellert17 Car Audio 0 July 29th 03 01:03 AM
Eclipse and Satalight radio Sam Carleton Car Audio 1 July 11th 03 06:15 AM


All times are GMT +1. The time now is 11:49 AM.

Powered by: vBulletin
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright ©2004-2023 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"