Thread
:
Denon DCR-470R connector pinout
View Single Post
#
14
eddie8188
Junior Member
Posts: 1
Quote:
Originally Posted by
e-nigma
"Matt Ion" wrote in message
news:Ien6h.315687$5R2.307249@pd7urf3no...
wrote:
I finally got hold of a schematic (PDF file) for that car stereo which
I'm trying to use its CD-changer input for my MP3 player.
http://www.esnips.com/web/no-spam2-files
Anyone knowledgable in electronics who can figure out how this can be
done?
I just want to connect the headphone output from my MP3 player into the
car stereo without having to use a cassette adapter as I'm using now.
Looks like pins 1 and 3 are your CD in right and left, and pins 2 and 4
are ground (use either or both).
Easiest way is probably to pick up a headphone extension cable and a male
DIN plug to fit the back of the deck; cut the female end off the
extension, and solder as appropriate into the DIN plug - red is typically
right+, white or black is left+, and the shield is ground.
I agree with that, but pin 4 or 5 may have to be triggered somehow to tell
the unit to switch to changer input.
or 4 and/or 5, and/or 6 might have to have a load on them before it will
switch.
Or do you think that just pressing the changer button on unit will activate
changer input?
I know a lot of new unit want to see a load before it switches to changer
input.
Hi I also want to make this connection, are you finally success? Can you please kindly teach me how to connect? thanks wait for you reply
Reply With Quote
eddie8188
View Public Profile
Send a private message to eddie8188
Find all posts by eddie8188