Question about passive preamps
"François Yves Le Gal" wrote in message
...
On Tue, 13 Dec 2005 21:27:12 -0500, "Robert Morein"
wrote:
IME, 2K is not adequate for more than short runs.
Huh? What do you mean? A typical consumer amp shows an input R of more
than
10 KOhms.
Actually, that's the standard EIA worst case input impedance for consumer
electronics. Many pieces have higher input impedances, often around 100K.
A 5532 can swing nearly all the way to the rails in such a load...
Exactly!
|