On 3/6/2018 1:55 PM, JBI wrote:
The Presonus speakers and Behringer 202 box are connected both to one
another with the box plugged in to the laptop USB port.Â* Booting up the
laptop, I seem to get an annoying "pop" from the speakers.Â* Doesn't seem
to matter if I have the volume on the Behringer turned all the way down,
I still get the pop.Â* What's the best way to circumvent this?
Turn the speakers on after the computer is finished making all of its
rude noises. I have a sequenced power strip that has a few outlets that
come on as soon as I switch the power on, a few that come on about 10
seconds later, and the ones that the power amplifier for the monitors
are plugged in comes on 30 seconds later.
I got mine at a hamfest for about $5, but they're pretty expensive
normally. You're better off just getting a cheap switched power strip,
plug the speakers into that, and turn them off before you shut down the
computer, and then, when you boot up the computer and start playing some
audio and don't hear anything, you'll remember to switch on the speakers.
--
For a good time, call
http://mikeriversaudio.wordpress.com