Reducing noise in digital recordings
If the problem is the pre-amp, would the noise be less noticable if the
pre-amp was sending a stronger signal to the computer? Is cranking up the
gain almost to full increasing the noise that might otherwise not occur with
a stronger signal from another pre-amp to the PC?
"Eeyore" wrote in message
...
Bill Bremmer wrote:
On the Mobile Pre, the gain control is set at about 4 o'clock, six is
about
maximum.
The spec on this is so useless that I can't tell how many dB of gain that
is.
I suspect you simply need a quieter mic pre.
Graham
|