Try here.....
http://www.chemi-con.com/files/U32DU32DH9.pdf

Looks like their 39,000uf at 100V 105c is the closest in physical size.....
same diameter slightly shorter than your measurement 2.5in x 4.625".....
the original was...63.5mm=2.5in 120mm=4.72in

If your distributor does not stock the U32 series you could try U36 85c
units...

The 33,000uf at 100V 85c is the closest 85c unit....

http://www.chemi-con.com/files/U36DU36DH9.pdf

Finding someone with units in stock might be more of a challenge...

Rgds:
Eric


"Jim" wrote in message ...
A week ago I emailed BHC Aerovox, Nichicon and several other
manufacturers, who advertise high quality power capacitors, but they
have not responded. Several others responded saying they don't carry
this cap. value. Where can I go to obtain high quality power caps.?

I need a pair of replacement power capacitors to replace the one's
originally manufactured by Nichicon and marked as follows

CE W
Nichicon 85°C
22,000 uf
80WV
60322

Application: One cap. is used on the power supply +60VDC rail and
another on the -60VDC rail.

Insulation color: black
Dia.=63.5 mm (desired to maintain this value for mtg. reasons)
Height approx. 120 mm (approx. max. ht.)
Spacing betwn screw terms = 28.6 mm

I'd like to upgrade to a higher voltage and temp. e.g. 105°C, if feasible.

Increasing cap. value is worth considering if the associated circuitry
can deal with the extended inrush current, etc.

What value of ESR (meas. freq.?) is desirable for these caps used in a
120W (8 ohm) audio power amplifier?

Thanks for your help and recommendations. Jim